Hdd Ide
Posted on Tuesday, March 3rd, 2009 at 6:20 am
Building Your Own Pc From Scratch
Are you aware what could beat the exciting feeling of having a brand new pc? Make your personal PC!
Making your personal laptop from scratch just isn’t only fun to do but cheaper as well. You will get to decide on the elements you wish to use in your PC. This offers you the control in balancing the price and the quality of your newly assembled PC.
Earlier than we show you the steps, listed here are the required parts of the computer that you have to purchase:
• Processor Cooler
• Motherboard memory
• Graphics Card
• Hard Drive
• CD or DVD Author
• Floppy Drive
• Sound Card
• Computer Case
• Power Supply
• Monitor
• Keyboard
• Mouse
Steps in making your individual PC:
Step 1
The computer case includes motherboard spacers and screws. This helps set the motherboard within the case. Mount the spacers into the corners and to the proper side holes. It should match up with the holes in your motherboard.
If the motherboard has different jack arrangements from the case’s I/O (enter/output) shield, use the defend that comes with the motherboard. Mount it from the within of the case.
Now, to install the processor, elevate the lever on the aspect of the CPU (processor) socket. The CPU’s pins are made in a approach that it’s doable to place the CPU into the socket only one way. Therefore, if you are doing it proper, it should simply fit.
Maintain the processor down and near the lever. Earlier than installing the CPU cooler, put thermal compound onto the highest of the CPU (on core).
Step 2
Mount the processor cooler on top of the processor. Press down lightly. Clip the heat sink to the processor socket. Connect the CPU cooler’s fan energy to the motherboard’s fan header. It is usually labeled “CPU FAN 1″.
Plug within the reminiscence module to the long sockets called DIMM’s. Unlock each tabs and push the reminiscence straight down. The clips on the slot’s sides should close. Fastidiously push the motherboard towards the I/O shield. Put in and tighten the motherboard screws. Do not force it.
The brown slot nearest to the processor is the AGP slot meant for the video card. Insert the video card evenly within the slot provided. Screw the cardboard into place. Ensure that your AGP video card is placed properly.
On the corner of the motherboard, you can see {two} rows of pins. Join case leads to the pins. These leads are normally labeled. Read your motherboard manual. See which label goes to which set of pins.
Step three
Now we mount the floppy drive, CD/DVD drive and the arduous drive. The motherboard often has 2 IDE channels, every supporting 2 devices. When you install 2 IDE gadgets on the same cable, you will have the main to be the “grasp” and the opposite to be the “slave”.
This is similar procedure for CD/DVD drives. Search for an HDD and CD drive manual for the right jumper settings. It is best to do these before you screw drives into place.
Join laborious drives to a channel totally different from the CD drives. Floppy controller has a socket shorter than the IDE controllers.
Make sure that the side of the IDE cable that has a red colored stripe traces up with pin1.
Lastly, plug in the main ATX energy cable and connect all drives with the facility supply. If in case you have extra case coolers, you might also connect them.
Now, join your monitor, keyboard, mouse and audio system to the back of the case. Put within the power cable to the power provide unit. Double-check correct installation before the first boot.
Now you can present your folks your first assembled computer.
About The Author
Anthony has been writing articles on-line for nearly 3 years now. Not solely does this creator concentrate on Computers and Technology, it’s also possible to check out his newest website on find out how to convert WMV to AVI with WMV to AVI converter which also helps people find the best WMV to AVI converter on the market.
USB Hard Drive Adapter | IDE or SATA
|
|
K.Hall Designs Egyptian Jasmine Reed Diffuser $38.00 K.Hall Designs Beautiful Egyptian Jasmine Scented Oil Diffuser The true Scent of Jasmine is known as the oil of Love. This lush Floral is Intoxicating MADE WITH ABSOLUTE JASMINE OIL This diffuser is is made with the finest elements to insure a successful product. Thicker reeds enable the scent to travel better and saturate the reeds thoroughly to disperse the scent effectively. K.Hall Designs u… |
|
|
Makita Lxt211 Case $21.99 Lxt211 case… |
|
|
New Western Digital HDD160GB WD1600AAJB 3.5-Inch EIDE 7200rpm 8MB Cool-Running Quiet Operation … |
|
|
Lorex DXR109081 9-channel Digital Video Recorder with Removable 80 GB HDD $959.95 The Lorex DXR109081 9-channel Digital Video Recorder with Removable 80 GB HDD combines a nine-channel multiplexer with a DVR (digital video recorder. The DXR109081 is a cost effective DVR that can store hours of video on a HDD (hard disk drive) without image degradation or tape-swapping, making it an ideal replacement for aging time-lapse VCRs. This DVR includes many features, such as multiple eas… |
|
|
Coolerguys 110v AC to 12 / 5v DC 4pin Molex 2A Power Adapter $8.99 Great Adapter to Power your Entertainment Center Cooling or Lighting. Standard 4 Pin Molex Connector…. |
|
|
MUKii ZIPO 2.5 HDD Protector, Black, 2 Pcs Per Pack, Model ZIO-P210-BK $4.99 Model: ZIO-P210-BK Device Support: SATA/IDE Hard Drive X2 Device Size: 2.5″ Material: Plastic Protector Dimension: 108 x 81.4 x 14.8mm… |
|
|
Syba SY-BIR-IDESA IDE/SATA Converter Bi-Directional IDE to SATA $5.80 SYBA SATA/IDE 2WAY CONVERTER JM… |
|
|
3.5ESATA/USB Enclosure Kit $79.99 Adaptec eSATA/USB hard drive enclosure kit (ACS-300) is an ideal solution for converting 3.5-inch internal SATA 1.5Gbps & 3Gbps hard drives into external eSATA/USB2.0 high speed mobile drives…. |
|
|
1984 Topps # 8 Don Mattingly Rookie RC Yankees-PSA 9 MINT $38.99 1984 Topps # 8 Don Mattingly- Yankees-PSA 9 – MINT… |
|
|
1979 Topps Ozzie Smith Rookie RC #116 – PSA 6! 1979 Topps Ozzie Smith RC #116 – PSA 6!… |