Scsi Controller
Posted on Sunday, March 13th, 2011 at 2:22 am
Raid, What is it and Why Do You Care?
RAID is an acronym for Redundant Array of Intelligent Disks. Sometimes the acronym is quoted as Redundant Array of Intelligent Devices or Redundant Array of Inexpensive Disks. In any case it is a group of hard drives arranged to optimize your storage to suit your individual needs. The optimization is either done with software (Software RAID) or hardware (Hardware RAID). Hard drives configured in a RAID setup are called an array. There are many types of RAID arrays some of them that you may see referenced are RAID 0, RAID1, RAID 5, RAID 6, JBOD and then there are the combination arrays that sometimes are referred to a two digit number and sometimes as one number + another number. i.e. RAID 0+1 or RAID 10, RAID1+5 or RAID 15. Because different sources identify these configurations differently I will not attempt to identify all the possible configurations and all the possible acronyms for them. I will however try to explain what the most common types of RAID are, and how they can affect your small business.
RAID 1 provides hard drive redundancy. Two identical hard drives are installed, one is loaded with the operating system and all your programs and data, the other copies the first drive constantly. This is called a mirror and if one of the drives fails you can set the other drive to take over with no loss of data and no down time. The failed drive can be replaced later or even while the computer is running on some configurations (those would be the more expensive ones).
Mirroring is highly recommended for Small Business operations, you just can not risk losing your data or shutting your network down while you try to recover your data. The downside to mirroring is that the copy process slows the system down a bit. If you are running a Software RAID mirror, the slow down is going to be noticeable, but not unreasonable. Hardware mirroring is nearly undetectable.
RAID 0 provides high performance, commonly called Striping. Two (or more) identical drives are installed and the RAID controller configures them both as one drive of approximately twice the size. When the system reads from or writes to the new single drive, it actually reads or writes stripes of data across both drives at the same time. This reduces the time it takes to access or store the data. The downside to Striping is that if one drive fails, all the data is lost. (Bummer!)
A common compromise used to be RAID 10 which stripes two sets of two drives for speed, and then mirrors one striped drive to another. The end result is faster than a regular mirror, and slower than a regular striped drive. If any one drive fails, the mirrored stripe continues to function. The downside here is you need 4 or more drives, which drives the cost up.
RAID 5 was designed to resolve all the issues. RAID 5 stripes across three or more drives, in the process it writes an extra recovery stripe. If one drive fails, the other drives can rebuild the data from the recovery stripe information. Again this is often offered in a “Hot Swap” arrangement so the dead drive can be replaced, and rebuilt without even rebooting the machine. Until recently RAID 5 was only available in high end SCSI setups, not commonly found in Small Business offices. The only downside to RAID 5 is that you lose about 1/3 of the drives total capacity to the recovery stripe. (A small price to pay!)
RAID 6 is a new configuration being touted by Intel and others as the next generation. At this point I will leave the advantages of RAID 6 for you to determine on your own if you are interested. Read more about it here.
JBOD is “Just a Bunch Of Disks”. Basically you have a RAID controller and you are using it just to increase the number of drives you have. There is no real RAID function in JBOD in the traditional sense of the term.
The thing that makes RAID a point of interest at this time is the development of the SATA II standard and the introduction of inexpensive SATA RAID controllers built right on the motherboards. In the past this was not unheard of for RAID 0, 1 and 0+1 but RAID 5 was SCSI only. Today you can buy a motherboard for $200 or less with SATA II RAID 0, 1, and 5 (and all the combinations) built right on. Additionally you can buy SATA II controllers from companies like Adaptec which will allow you to run any SATA RAID configuration you want on pretty much any modern motherboard you want.
The real kicker here is that SATA drives are inexpensive. In the past a RAID configuration would include a SCSI hard drive that cost in the neighborhood of $500 each, currently that will get you about 146GB. So take a five hard drive RAID 5 solution as an example: Five 146 GB hard drives @ $500=$2500 this would yield around 487 GB of space. In addition a RAID 5 SCSI controller card would be required, these typically run $350 to $700 more. Server grade motherboards came with built in RAID 5 SCSI controllers, but the cost was easily $300 higher than a motherboard without the controller. So the end cost here is between $2800 and $3200, or a minimum of $5.75 per GB.
Now let’s look at the new SATA II RAID 5 configuration: You can buy a motherboard for under $150 with onboard RAID 5, or a SATA II RAID 5 controller for about $200 to $250. You can buy five 250 GB SATA II hard drives for something like $300. This would yield about 833 of space. The final cost then is between $650 and $750 or $0.78 per GB on the low end.
Now let’s take a quick look at the cost of mirroring. If you have a Windows 2000 or newer server you can run a software mirror that is built into the OS, as I mentioned there will be a detectable slow down in the system. Alternatively, you can run a hardware mirror in your server, or even on a single desktop. The cost for two hard drives and a controller card would come in the neighborhood of $300 to $350. SATA II RAID cards like the Adaptec 1420SA, without the RAID 5 function, are about $150, 500 GB drives are about $100 each.
Consider what would happen tomorrow if you were working away and your hard drive failed. If you have been reading this webpage then you probably have a backup, but how long will you be down while you have the drive replaced, the software reinstalled and the data restored from backup? You DO have a backup, right?
Would you pay $300 to be certain you would never lose your data and not have to shut down the machine during a busy workday for because of a failure?
I would (already did).
Just FYI. here are a couple of website with more information on RAID. Remember, some details like the acronyms do not agree from one author to the next, but the concept and the execution are the same.
About the Author
Steve Weigle is the owner of Village Geek Computers, an IT center with multiple locations. Steve has provided IT services to Central Indiana since 1996.
Silicon Graphics Fuel workstation
|
|
Supermicro SuperServer 6014P-8 ( SYS-6014P-8 ) $1,241.86 pDesigned for high-performance servers clustering and business critical applications, this Supermicro 1U rack server supports the latest 800MHz FSB Xeon with EM64T. It features a pair of universal expansion slots that can be utilized for either PCI-X-133/100 or the latest PCI-Express cards to provide outstanding I/O flexibility./p… |
|
|
HP ProLiant DL380 G6 Server – 1 x Xeon 2GHz – 4GB DDR3 SDRAM – Serial Attached SCSI RAID Controller – Rack $1,354.00 The HP ProLiant DL380 G6 Server continues to deliver on its heritage of engineering excellence with increased flexibility and performance, enterprise-class uptime and manageability, 2-socket Intel Xeon performance, and 2U density for a variety of applications…. |
|
|
PROMISE RAID SATA 3U/16BAY FC-SAS 8G – REDUNDANT PSU W/ 8 2TB SATA DRIVES – VR1840FNAC2C 0 1 1 x Intel IOP348 RAID Controller 1 x Serial Attached SCSI 10 1000f 110 V AC 16 TB Installed 17.57″ 18.15″ 1840f 1E 2 x – Fibre Channel 2 x – iSCSI 2 x 450 W Redundant Hot-swappable 220 V AC 3 3.5″ (16 Total/8 Populated) 30 3U – Rack-mountable 5 5.12″ 50 56 lb 6 60 8 x 2 TB The VessRAID 1840f is equipped with two ports of 8Gbps Fiber Channel and two ports of Gigabit Ethernet designed for file a… |
|
|
Raidtec launches 800MB/s SAN Storage Array, FibreArray 2208.(Product Announcement): An article from: Federal Computer Market Report $5.95 This digital document is an article from Federal Computer Market Report, published by Millin Publishing, Inc. on October 14, 2002. The length of the article is 475 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.Citation… |
|
|
ISO/IEC 14776-341:2000, Information technology — Small Computer System Interface-3 (SCSI-3) — Part 341: Controller Commands (SCC) $246.00 This International Standard defines the command set extensions for SCSI-3 storage array devices; commonly known as RAID devices. This standard is principally intended to be used in conjunction with, not as an alternate to, any of the SCSI-3 command standards and the SCSI-3 Architecture Model Standard (ISO/IEC IS 14776-411). The resulting commands facilitate the control and configuration of SCSI-3 … |
|
|
SGI DEBUTS NEXT-GENERATION 2GB FIBRE CHANNEL RAID ARRAY.(SGI Total Performance 9400)(Product Announcement): An article from: Computer Workstations $5.95 This digital document is an article from Computer Workstations, published by Worldwide Videotex on December 1, 2001. The length of the article is 1001 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available in your Amazon.com Digital Locker immediately after purchase. You can view it with any web browser.Citation DetailsTitle… |
|
|
HP ProLiant DL380 G6 Server – 1 x Xeon 2.26GHz – 4GB DDR3 SDRAM – Serial Attached SCSI RAID Controller – Rack $2,450.00 The HP ProLiant DL380 G6 Server continues to deliver on its heritage of engineering excellence with increased flexibility and performance, enterprise-class uptime and manageability, 2-socket Intel Xeon performance, and 2U density for a variety of applications…. |
|
|
Overland Storage U320 SCSI BUS Upgrade – Storage Upgrade Kit (N05144) Category: Software Suites $2,250.00 Item #: N05144. For more than 20 years, IT professionals have trusted Overland Storage to provide a safe place for mission-critical information. Overland’s mission is to empower customers to compete and succeed in the Information Age through world-class storage management solutions. Product Description: Overland Storage U320 SCSI BUS Upgrade – storage upgrade kitProduct Type: Storage upgrade kit C… |
|
|
HP ProLiant DL185 G5 Server – 1 x Opteron 2.1GHz – 4GB DDR2 SDRAM – Serial Attached SCSI RAID Controller – Rack $2,099.00 1 x Opteron 2.1GHz – 4GB DDR2 SDRAM – Serial Attached SCSI RAID Controller – Rack… |
|
|
HP 339051-001 HP/Host Bus SCSI Adapter PCI Controller 339051-001 (339051001) HP 339051-001 HP/Host Bus SCSI Adapter PCI Controller 339051-001 Internal (339051001)Product Details: Manufacturer: HPPart Number: 339051-001Category: Others Interface: SCSI Capacity: N/ARotation Speed: N/A Form Factor: InternalItem Condition: HDExchanges SKU#: SKUB25804Product Highlights:90 Days Unlimited WarrantyExtended Warranty AvailableQuantity Discount Applicable One Year Product Support… |